De Mastersizer 3000 is de nieuwste generatie van 's werelds meest populaire analyser voor het meten van deeltjesgrootte. De analyser werkt op basis van laserdiffractie technologie en levert met groot gemak snelle, nauwkeurige deeltjesgrootteverdelingen voor zowel natte als droge dispersies. Met metingen van nanometers tot millimeters heeft systeem een uitzonderlijk meetbereik en is het uniek door de zeer kleine footprint. Mastersizer 3000 staat voor operator onafhankelijke metingen waarop elke gebruiker kan vertrouwen.
Documenten
Smarter particle sizing
Specificaties
Specificaties
Particle size
Suspensions, emulsions, dry powders
Principle
Laser light scattering
Analysis
Mie and Fraunhofer scattering
Data acquisition rate
10 kHz
Typical measurement time
<10 sec
Optics
Red light source: Max. 4mW He-Ne, 632.8nm
Blue light source: Max. 10mW LED, 470nm
Lens arrangement: Reverse Fourier (convergent beam)
Effective focal length: 300mm
Detector
Arrangement: Log-spaced array
Angular range: 0.015 - 144 degrees
Alignment: Automatic
Size
Particle size: 0.01 - 3500 µm
Number of size classes: 100 (user adjustable)
Accuracy: Better than 0.6%
Precision / Repeatability: Better than 0.5% variation
Reproducibility:Better than 1% variation
Dimensions
690 (W) x 300 (D) x 450 (H) mm
Weight
30 kg
Hoe het werkt
Hoe het werkt
The Mastersizer 3000 uses the technique of laser diffraction to measure the size of particles. It does this by measuring the intensity of light scattered as a laser beam passes through a dispersed particulate sample. This data is then analyzed to calculate the size of the particles that created the scattering pattern.
A typical system is made up of three main elements:
- Optical bench - A dispersed sample passes though the measurement area of the optical bench, where a laser beam illuminates the particles. A series of detectors then accurately measure the intensity of light scattered by the particles within the sample for both red and blue light wavelengths and over a wide range of angles.
- Sample dispersion units (accessories). Sample dispersion is controlled by a range of wet and dry dispersion units. These ensure the particles are delivered to the measurement area of the optical bench at the correct concentration and in a suitable, stable state of dispersion.
- Instrument software. The Mastersizer 3000 software controls the system during the measurement process and analyzes the scattering data to calculate a particle size distribution. It also provides both instant feedback during method development and expert advice on the quality of the results.
Accessoires
Accessoires
Hydro Sight
See you dispersion
The Hydro Sight™ is a revolutionary accessory for the Mastersizer range of instruments providing rapid visualization and assessment of your liquid particle dispersion during a measurement.
Hydro SV
Small volume wet sample dispersion
The Hydro SV is a simple, cost effective liquid dispersion unit designed to enable particle size analysis using small volumes of sample and dispersant.
Hydro MV
Medium volume automated dispersion unit
The Hydro MV is medium volume unit for the controlled, automated wet dispersion of samples for particle size analysis. Suitable for both aqueous and non-aqueous applications, it is especially useful when sample size is limited and/or dispersant use must be minimized.
Hydro LV
Large volume wet sample dispersion
The Hydro LV is an automated large volume unit that controls wet dispersion of materials for particle size analysis. It is especially suitable for applications where the sample size is relatively large or the size distribution is very broad.
Hydro EV
Flexible volume wet dispersion
A unique dip-in wet sample dispersion unit that can be used with standard laboratory glassware. Suitable for a wide variety of dispersant volumes and particle size ranges.
Hydro SM
Small volume entry level wet dispersion unit
The Hydro SM is a cost effective wet sample dispersion unit designed for measuring samples in non-aqueous dispersants where solvent usage needs to be minimized.
Aero S
State-of-the-art dry powder dispersion
Setting new standards for dry powder dispersion, the Aero S has been designed from the ground up based upon fundamental powder dispersion theory. The modular design ensures rapid and reproducible dispersion of the widest range of samples from cohesive powders to fragile materials.
